Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | Next revisionBoth sides next revision |
| kit:crowbox2_v20_bom [2020/09/01 06:12] – admin | kit:crowbox2_v20_bom [2020/09/01 06:15] – admin |
|---|
| | 9 sq. in. | Conductive Copper Tape | {{:kit:bom:bom_copper_tape_256.jpg?nolink|}} | Used in building the coin sensor. Sometimes called "copper shielding tape" or "emi shielding tape". A 1 inch wide roll is recommended. \\ \\ **NOTE:** A suitable item can be found at home and hardware stores, often labeled as 'slug and snail barrier tape', if electrical shielding tape is difficult to find. | | | 9 sq. in. | Conductive Copper Tape | {{:kit:bom:bom_copper_tape_256.jpg?nolink|}} | Used in building the coin sensor. Sometimes called "copper shielding tape" or "emi shielding tape". A 1 inch wide roll is recommended. \\ \\ **NOTE:** A suitable item can be found at home and hardware stores, often labeled as 'slug and snail barrier tape', if electrical shielding tape is difficult to find. | |
| | 24 sq.in. | Grip/Traction Tape | {{:kit:bom_traction_tape_256.jpg?nolink|}} | Used to provide non-skid surfaces for birds to stand. \\ \\ **NOTE:** Duct tape may be used in a pinch if you are unable to source traction tape. | | | 24 sq.in. | Grip/Traction Tape | {{:kit:bom_traction_tape_256.jpg?nolink|}} | Used to provide non-skid surfaces for birds to stand. \\ \\ **NOTE:** Duct tape may be used in a pinch if you are unable to source traction tape. | |
| |asstd.| M2 and M3 machine screws with nuts | {{ :kit:bom:bom_machine_screws_256.jpg?nolink |}} | 2mm and 3mm machine screws. 3mm screws in 8mm and 10mm lengths, 2mm screws in 12mm length. Pan head or socket cap recommended. \\ \\ **NOTE:** Avoid 'countersink' style heads \\ **NOTE:** It's easiest to buy a machine screw assortment that contains assorted 3mm and 2mm screws. | | |asstd.| M2 and M3 machine screws with nuts | {{ :kit:bom:bom_machine_screws_256.jpg?nolink |}} | 2mm and 3mm machine screws. 3mm screws in 8mm and 10mm lengths, 2mm screws in 12mm length. Pan head or socket cap recommended. \\ \\ **NOTE:** Avoid 'countersink' style heads \\ **NOTE:** It's easiest to buy a machine screw assortment that contains assorted 3mm and 2mm screws, but these can also be bought individually and in small packets at Home Depot or other home building supply stores. Unless you're supplying a home shop for multiple projects this is probably a better solution than buying a large quantity online. | |
| |2| 1/8" Hitch pins | {{:kit:bom:bom_hitch_pin_256.jpg?nolink|}} | Used to secure the perch platform while allowing for easy removal. \\ \\ **NOTE:** These are optional- You can use small plastic cable ties instead, as the perch platform rarely needs to be removed. | | |2| 1/8" Hitch pins | {{:kit:bom:bom_hitch_pin_256.jpg?nolink|}} | Used to secure the perch platform while allowing for easy removal. \\ \\ **NOTE:** These are optional- You can use small plastic cable ties instead, as the perch platform rarely needs to be removed. | |
| |
