User Tools

Site Tools


kit:parts_list_v007

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

kit:parts_list_v007 [2017/01/13 16:15]
steve [Grand Total] - First cost estimate
kit:parts_list_v007 [2018/08/01 13:37]
Line 1: Line 1:
-**NOTE:** Items marked with "Current Best Price" have not been comparison-shopped nor priced in bulk yet. 
- 
-**NOTE:** Shipping costs not included! This could be a silent killer. Some items assume Amazon Prime membership 
- 
- 
-====== Electronics ====== 
-===== Processor & Shields ===== 
-==== Arduino Core ==== 
-  *Arduino Uno development board 
-    * Cost (genuine): $16.00 
-    * Cost (clone): $10.00 
-  *SD Card shield Cost: $2.00 
- 
-  Current total cost: $28.00 - NOTE: No Camera with this config! 
- 
- 
-==== Raspberry Pi Core ==== 
-  * Raspberry Pi Zero with camera bundle. Current best price: $40 (Adafruit) 
-  * Raspberry Pi servo hat. Current best price: $18 (Adafruit) 
-  * Edimax USB wifi dongle. Current best price: $8 (Amazon) 
- 
-  Current total cost: $66.00 
- 
-===== Components ===== 
-  * Hookup wire: 22AWG stranded. 25 feet RED, 25 feet BLACK. Cost: $6.00 for both spools 
-  * Dupont jumpers: GET COUNT. GET LENGTH. DETERMINE ENDS. FIND SOURCE. 
-  * 1x Half-size breadboard. Cost: $5.00 
-  * 3x Two-position screw terminals for breadboard. Cost $Repackaged from bulk 
-  * 3x Mini limit switches for lid. Cost: $2.00 for three 
-  * 4 pairs 22AWG m/f bullet terminals (8 pieces total) Cost: $Repackaged from bulk 
-  * 8ft 24 AWG bare copper wire. Cost: 25 cents per Crowbox if bought in bulk & portioned 
-    * Otherwise, cost for entire roll  
- 
-  Current total cost: $13.25 presently, but not all items accounted for yet. 
- 
- 
-===== Motor ===== 
-MG995 Metal gear servo. Current best price: $6.00 per servo 
- 
-  Current total cost: $6.00 
- 
-====== Structural ====== 
-All information in this category currently assumes fabrication at PONOKO.COM 
- 
-  *1/4 inch acrylic rod (for push rod) 
-  *790x384x3mm acrylic sheet (solid color) - Cost: $25.23 fabricated 
-  *181x181x3mm acrylic sheet (translucent) - Cost: $4.50 fabricated 
-  *384x384x3mm acrylic sheet (transparent) - Cost: $9.13 fabricated 
-  *384x384x.5mm styrene sheet (white) - Cost: $2.50 fabricated 
- 
-  Current Cost: $41.36 plus shipping 
- 
- 
- 
-====== Fasteners ====== 
-  *M3 bolts (get specific on length, cap style, etc) 
-  *M3 nuts 
-  *Silicone rubber band for lid, two inch (include extras). Current best price: 25 cents per band 
- 
-  Current Cost: [Not done building the list of required fasteners] 
- 
-====== Grand Total ====== 
-**NOTE:** - This information is just the sum of the categories above. It WILL change before shipping. Some parts are not yet sourced, priced, or best-priced, so this number is just the closest estimate we have. 
- 
-  $88.61 
  
kit/parts_list_v007.txt ยท Last modified: 2018/08/01 13:37 (external edit)