User Tools

Site Tools


kit:parts_list_v007

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
kit:parts_list_v007 [2016/12/26 14:00]
steve [Components]
kit:parts_list_v007 [2018/08/01 13:37] (current)
Line 18: Line 18:
   * Raspberry Pi Zero with camera bundle. Current best price: $40 (Adafruit)   * Raspberry Pi Zero with camera bundle. Current best price: $40 (Adafruit)
   * Raspberry Pi servo hat. Current best price: $18 (Adafruit)   * Raspberry Pi servo hat. Current best price: $18 (Adafruit)
 +  * Edimax USB wifi dongle. Current best price: $8 (Amazon)
  
-  Current total cost: $58.00+  Current total cost: $66.00
  
 ===== Components ===== ===== Components =====
-  * Half-size breadboard. Cost: $5.00 +  * Hookup wire: 22AWG stranded. 25 feet RED, 25 feet BLACK. Cost: $6.00 for both spools 
-  * Bullet terminals2 pairs (m/f(pieces total) +  * Dupont jumpers: GET COUNT. GET LENGTH. DETERMINE ENDS. FIND SOURCE. 
-  * 24 AWG bare copper wire (90 inches). Cost: 25 cents per box if bought in bulk & portioned+  * 1x Half-size breadboard. Cost: $5.00 
 +  * 3x Two-position screw terminals for breadboard. Cost $Repackaged from bulk 
 +  * 3x Mini limit switches for lid. Cost: $2.00 for three 
 +  * 4 pairs 22AWG m/f bullet terminals (pieces total) Cost: $Repackaged from bulk 
 +  * 8ft 24 AWG bare copper wire. Cost: 25 cents per CrowBox if bought in bulk & portioned
     * Otherwise, cost for entire roll      * Otherwise, cost for entire roll 
-  * Hookup wire: GET GAUGE. GET LENGTH. FIND SOURCE. 
- 
-  Current total cost: [needs computed] 
  
 +  Current total cost: $13.25 presently, but not all items accounted for yet.
  
 +===== Voltage Regulator Components =====
 +  * The actual regulator chip
 +    * LM7806CZ DC 1.5A Positive Voltage Regulator, 6V
 +  * Capacitor #1
 +  * Capacitor #2
 +  * Diode
 ===== Motor ===== ===== Motor =====
 MG995 Metal gear servo. Current best price: $6.00 per servo MG995 Metal gear servo. Current best price: $6.00 per servo
Line 37: Line 46:
  
 ====== Structural ====== ====== Structural ======
 +All information in this category currently assumes fabrication at PONOKO.COM
 +
   *1/4 inch acrylic rod (for push rod)   *1/4 inch acrylic rod (for push rod)
-  *1/8" acrylic sheet (dark color) +  *790x384x3mm acrylic sheet (solid color) - Cost: $25.23 fabricated 
-  *1/8" acrylic sheet (light color+  *181x181x3mm acrylic sheet (translucent- Cost: $4.50 fabricated 
-  *1/8" acrylic sheet (transparent color+  *384x384x3mm acrylic sheet (transparent) - Cost: $9.13 fabricated 
-  *1/8" acrylic sheet (translucent green color)+  *384x384x.5mm styrene sheet (white- Cost: $2.50 fabricated 
 + 
 +  Current Cost: $41.36 plus shipping
  
-  Current Cost: [Need quantities in order to determine pricing] 
  
  
Line 52: Line 64:
  
   Current Cost: [Not done building the list of required fasteners]   Current Cost: [Not done building the list of required fasteners]
 +
 +====== Grand Total ======
 +**NOTE:** - This information is just the sum of the categories above. It WILL change before shipping. Some parts are not yet sourced, priced, or best-priced, so this number is just the closest estimate we have.
 +
 +===== Arduino Core =====
 +  $88.61
 +
 +===== Raspberry Pi Core =====
 +  $126.61
  
kit/parts_list_v007.1482789634.txt.gz · Last modified: 2016/12/26 14:00 by steve