User Tools

Site Tools


kit:parts_list_v007

This is an old revision of the document!


NOTE: Items marked with “Current Best Price” have not been comparison-shopped nor priced in bulk yet.

NOTE: Shipping costs not included! This could be a silent killer. Some items assume Amazon Prime membership

Electronics

Processor & Shields

Arduino Core

  • Arduino Uno development board
    • Cost (genuine): $16.00
    • Cost (clone): $10.00
  • SD Card shield Cost: $2.00
Current total cost: $28.00 - NOTE: No Camera with this config!

Raspberry Pi Core

  • Raspberry Pi Zero with camera bundle. Current best price: $40 (Adafruit)
  • Raspberry Pi servo hat. Current best price: $18 (Adafruit)
  • Edimax USB wifi dongle. Current best price: $8 (Amazon)
Current total cost: $66.00

Components

  • Hookup wire: 22AWG stranded. 25 feet RED, 25 feet BLACK. Cost: $6.00 for both spools
  • Dupont jumpers: GET COUNT. GET LENGTH. DETERMINE ENDS. FIND SOURCE.
  • 1x Half-size breadboard. Cost: $5.00
  • 3x Two-position screw terminals for breadboard. Cost $Repackaged from bulk
  • 3x Mini limit switches for lid. Cost: $2.00 for three
  • 4 pairs 22AWG m/f bullet terminals (8 pieces total) Cost: $Repackaged from bulk
  • 8ft 24 AWG bare copper wire. Cost: 25 cents per box if bought in bulk & portioned
    • Otherwise, cost for entire roll
Current total cost: [needs computed]

Motor

MG995 Metal gear servo. Current best price: $6.00 per servo

Current total cost: $6.00

Structural

  • 1/4 inch acrylic rod (for push rod)
  • 1/8“ acrylic sheet (dark color)
  • 1/8” acrylic sheet (light color)
  • 1/8“ acrylic sheet (transparent color)
  • 1/8” acrylic sheet (translucent green color)
Current Cost: [Need quantities in order to determine pricing]

Fasteners

  • M3 bolts (get specific on length, cap style, etc)
  • M3 nuts
  • Silicone rubber band for lid, two inch (include extras). Current best price: 25 cents per band
Current Cost: [Not done building the list of required fasteners]
kit/parts_list_v007.1483741095.txt.gz · Last modified: 2017/01/06 14:18 by steve